|
|
|
|
 |
|
|
|
 |
|
The UK's Number 1 Regional Picture Frame Wholesaler | |
Listing Products 1 to 14 of 18 |
|
|
PRISMA-CE Brevetti Mitre Saw |
(Code:PRISMA-CE) |
|
|
|
No crushing or chipping of mouldings
Blades are pulled across manually actuating moulding clamps
Cuts up to 120mm mouldings
2 x 1hp motors give 200 cuts per hour
Cuts aluminium, plastic, MDF & wooden mouldings |
 | |
|
|
|
|
PRISMA - MAXI Brevetti Mitre Saw |
(Code:PRISMA - MAXI) |
|
|
- Has the same characteristics as the PRISMA-CE but has a 180mm wide cut
|
 | |
|
|
|
|
PRISMATIC - E Brevetti Mitre Saw |
(Code:PRISMATIC - E) |
|
|
|
Air operated version of the PRISMA - CE
2 x 1.4hp motors give 300 cuts per hour |
 | |
|
|
|
|
C15 Brevetti Mitre Saw |
(Code:C15) |
|
|
|
Probably the latest mitre saw available
Pneumatic rebate clamps
2 electric motors with an air-operated downward vertical cut
Baar movable fences
Gives a 70mm wide cut
700-800 cuts per hour
Operates on hand controls
Cuts all types of mouldings
Operates on 3-phase electricity |
 | |
|
|
|
|
C16 Brevetti Mitre Saw |
(Code:C16) |
|
|
- The same as the C15 but with an 85mm cut
|
| |
|
|
|
|
VEGA-S Brevetti Mitre Saw |
(Code:VEGA-S) |
|
|
- The most popular saw for producing 4,6 & 8 sided frames
- Pnuematically sets to the chosen angle
- Fully adjustable moulding clamps
- Air blower to remove cut out pieces
- Air retracting production stops
- Air operated downward swing cut
- 2 x 2hp motors give 400 - 500 cuts per hour
- Gives a 100mm wide cut
- Operates on hand controls
- Will cut any type of moulding
- Operates on 3-phrase electricity
|
 | |
|
|
|
|
DELTA - UNI Brevetti Air Operated U/pinner |
(Code:DELTAUNI) |
|
|
|
Air operated
Automatically adjusts to different moulding heights
Allows 2 set positions and can double stack
Frontal safety shield
Able to fire both CP and PV wedges
Floor stand available |
 | |
|
|
|
|
SMART Brevetti Air Operated U/pinner |
(Code:SMART) |
|
|
|
Air operated
Automatically adjusts to different moulding heights
Allows 2 set positions and can double stack
Frontal safety shield
Able to fire both NP and PV wedges |
 | |
|
|
|
|
C100 Brevetti Coil-Fed U/pinner |
(Code:C100) |
|
|
|
This machine uses wedges that are fed from a coil cutting down on jamming problems and loading times
Universal magazine uses VM, VR and NR wedges
The wedges are uniquely tapered to pull the mitred joints together
Allows 2 set positions and can double stack
Able to produce 200 - 250 frames per hour |
 | |
|
|
|
|
AUT-2000 Brevetti Coil-Fed U/pinner |
(Code:AUT-2000) |
|
|
|
Electro pneumatic coil-fed underpinner
Designed specifically for high usage
Universal magazine uses VM, VR and NR wedges
The electronic control box will allow up to 10 pre set positions along the base of the moulding and will stack up to 4 wedges in each position
Able to produce up to 300 frames per hour |
 | |
|
|
|
|
AUT-2012 Brevetti Coil-Fed Hot Glue U/pinner |
(Code:AUT-2012) |
|
|
- Has the same features as the AUT-2000 but is equipped with an automatic gluer for hot melt or cold glue
- Able to produce up to 200 frames per hour
|
 | |
|
|
|
|
|
