 |
|
White Display Board
White Display Board
This popular board has won a multitude of fans in recent years. White Display Board is a 2000 micron board with a very dense core. Unlike many mount boards - which are softer and more open structured - White Display Board does not absorb moisture. Additionally the core is smoother than ordinary pulp boards, reducing the effect of orange peel on glossy work. The clay-coated high white board liners act as a good key for adhesives and also help repel moisture. As with all Hot Press boards, White Display Board is a pH neutral product, priced competitively for such a specialised product
Foam Plastic Full Sheet
(Code:A2197)Foam Plastic
A 13mm thick foam used to cover heatseal laminates during pressing. This foam may be used with all heated press types and is extremely durable.
Please Note:
It is always advisable to pre-treat a new sheet of foam before using it on any work. All foam contains fire retardants and these activate when the foam is initially heated. New foam needs to be heat conditioned in the press under pressure for a period of time to cook it into a flat shape. Failure to condition your foam can lead to invisible memory marks being embedded into the foam’s surface. These can then show up on subsequent jobs as ghost marks. If you would like more information on preventing this please feel free to contact us.
Vacufoam Full Sheet
(Code:A2208)Vacufoam
A 5mm thick foam used to cover heatseal laminates during pressing. This foam is only suitable for use in vacuum presses.
Please Note:
It is always advisable to pre-treat a new sheet of foam before using it on any work. All foam contains fire retardants and these activate when the foam is initially heated. New foam needs to be heat conditioned in the press under pressure for a period of time to cook it into a flat shape. Failure to condition your foam can lead to invisible memory marks being embedded into the foam’s surface. These can then show up on subsequent jobs as ghost marks. If you would like more information on preventing this please feel free to contact us.
Stretcher Pliers
(Code:A2241)
Metal pliers with extended jaws for pulling canvas around stretcher bars before stapling into position
Tacking Iron
(Code:A2226)Tacking Iron
| An electrically heated hand iron with a small precision tip. The tacking iron is a very useful tool for fixing drymount tissue to the back of a print and or board, prior to activation in a press. The tacking iron allows precision trimming and positioning of tissue and artwork on complex jobs. |  |
Piercing Tool
(Code:A2236)Piercing Tool
| These precision engineered rollers are specially designed to perforate heat activated mount films and PVC heatseal films, to allow air to pass through them during processing in a Hot Press. Though most of our films now come pre-pierced as standard, both clear and white drymount film require hand perforation, as does our very thick canvastex heatseal. The piercing tool comes in two widths and has hundreds of very sharp spikes that are used to create the pin sized holes required for air to escape during the mounting and laminating process. |
 |
